UV roller coating Varnish (UVZ-801C)

One Introduction UVZ 801C Varnish can be roller coated in a different paper, with high adhesion, high gloss, no yellowing, abrasion resistance, fast drying characteristics.(This product is of high viscosity, dilution before use. Without solvent.) TWO Technical parameters: Product: UVZ 801C Appearance: Transparent primrose liquid Specific gravity(25°c): 1.05 Viscosity(25°c): 100-150cps Non-volatile matter: Above 99% Printing base materials: different paper Drying speed( 80W/cm lamps 3): ≤3 seconds Typical features: Good glossiness Three Using Methods and Notice 1. Construction Technology: roller coating, and then to UV curing. 2. Adjusting gloss oil viscosity according to oiling condition (control tank temperature to be 30°c or so), but not more than 70°c printing. 3. According to the demand of paper brightness, adjust the Varnish, generally 4-6g/m2. 4. Oiling excessive or uneven coating will reduce the brightness. 5. Oiling after the must be completely UV curing, there would be no wear and scratches phenomenon. 6. The company is equipped with a dedicated cleaning agent cleaning coating roller. 7. Airtight preservation at light-avoiding and hot-avoiding place.